Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. 530sb
  5. User Manual

DELL 530sb User Manual

Download
Page of 222
190
Appendix
3 When 
F2 = Setup, F12 = Boot Menu 
appears in the upper-right 
corner of the screen, press <F12>.
If you wait too long and the operating system logo appears, continue to 
wait until you see the Microsoft Windows desktop. Then, shut down your 
computer and try again.
The Boot Device Menu appears, listing all available boot devices. 
Each device has a number next to it. 
4 At the bottom of the menu, enter the number of the device that is to be 
used for the current boot only.
For example, if you are booting to a USB memory key, highlight USB 
Flash Device and press <Enter>.
 
NOTE: 
To boot to a USB device, the device must be bootable. To ensure your 
device is bootable, check the device documentation.
Changing Boot Sequence for Future Boots
1 Enter system setup (see "Entering System Setup" on page 185).
2 Use the arrow keys to highlight the Boot Sequence menu option and press 
<Enter> to access the menu.
 
NOTE: 
Write down your current boot sequence in case you want to restore it.
3 Press the up- and down-arrow keys to move through the list of devices.
4 Press the spacebar to enable or disable a device (enabled devices have 
a checkmark).
5 Press plus (+) or minus (–) to move a selected device up or down the list.
Clearing Forgotten Passwords
 
CAUTION: 
Before you begin any of the procedures in this section, follow the 
safety instructions located in the Product Information Guide.
3 Locate the 3-pin password connector (PSWD) on the system board. 
NOTE: 
The location of the password connector may vary depending on the system.
book.book  Page 190  Monday, October 6, 2008  11:38 AM