DELL 350 User Manual
support.dell.com
Rack Installation Guide
1-11
Figure 1-9. Installing the Tab Cover
3.
Hold the tab cover firmly onto the server tab and engage the thumbscrew with
the receiving fastener on the slide bracket.
the receiving fastener on the slide bracket.
4.
Repeat steps 1 through 3 to install the tab cover on the other side of the system.
This completes the two-post flush-mount rack installation.
Four-Post Rack Kit Installation
This procedure provides instructions for installing a Dell system in a four-post rack cab-
inet. Both 24-U and 42-U racks are accommodated.
inet. Both 24-U and 42-U racks are accommodated.
Rack Kit Contents
The rack kit includes the following items (see Figure 1-10):
•
One pair of slide assemblies
•
One cable-management arm
•
Four 10-32 x 0.5-inch pan-head Phillips screws
•
Six 10-24 x 0.375-inch pan-head Phillips screws
•
One 1-U template for a four-post rack
NOTE: If you purchased a Dell rack along with your system, the slide assemblies may
be preinstalled in the rack.
be preinstalled in the rack.
server tab
thumbscrew
2D786bk0.book Page 11 Thursday, January 18, 2001 8:44 PM