DELL 350 User Manual
1-20
Rack Installation Guide
6.
At the front of the rack cabinet, position one of the slide assemblies so that its
mounting-bracket flange fits between the marks or tape you placed on the rack,
marking the upper and lower edges of the template (see Figure 1-17).
mounting-bracket flange fits between the marks or tape you placed on the rack,
marking the upper and lower edges of the template (see Figure 1-17).
The hooks on the bottom of the mounting bracket should enter the holes beside
the lower marks you made in the vertical rails.
the lower marks you made in the vertical rails.
7.
Secure the front of the mounting-bracket flange with a 10-32 x 0.5-inch pan-head
Phillips screw in the front vertical rail (see Figure 1-17).
Phillips screw in the front vertical rail (see Figure 1-17).
8.
Push back on the back mounting-bracket flange until the mounting hook locks into
the matching square hole on the back vertical rail.
the matching square hole on the back vertical rail.
9.
Repeat steps 6 through 8 for the remaining slide assembly on the other side of
the rack.
the rack.
Figure 1-17. Installing the Slide Assemblies
front of rack
slide assemblies (2)
mounting-bracket
flange
flange
10-32 x 0.5-inch
pan-head Phillips
screw (2 per slide
assembly)
pan-head Phillips
screw (2 per slide
assembly)
2D786bk0.book Page 20 Thursday, January 18, 2001 8:44 PM