DELL NX046 User Manual

Adding and Replacing Parts

153

NOTICE:

To disconnect a network cable, first unplug the cable from your computer

and then unplug the cable from the network device.

3 Disconnect all telephone or network cables from the computer.

NOTICE:

To avoid damaging the system board, you must remove the main battery

before you service the computer.

4 Disconnect your computer and all attached devices from their electrical

outlets.

Removing the Computer Cover and Front Panel

Removing the Computer Cover

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from

the electrical outlet before removing the cover.

NOTICE:

To prevent static damage to components inside your computer, discharge

static electricity from your body before you touch any of your computer’s electronic

components. You can do so by touching an unpainted metal surface on the

computer.

NOTICE:

Opening the computer cover while the computer is running could result in

a shutdown without warning and a loss of data in open programs. The computer

cooling system cannot function properly while the cover is removed.

2 If you have installed a security cable, remove it from the security cable slot.

NOTICE:

Ensure that sufficient space exists to support the removed cover—at

least 30 cm (1 ft) of desk top space.

NOTICE:

Ensure that you are working on a level, protected surface to avoid

scratching either the computer or the surface on which it is resting.

3 Lay your computer on a flat surface with the cover facing up.
4 Pull back the cover latch release.

NOTE:

The computer in the following images is configured as a tower computer.

regarding computer orientation.