DELL NX046 User Manual
Adding and Replacing Parts
205
11 Rotate the hard-drive carrier back into place (see "Rotating the Hard Drive
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug the cable into the computer.
12 Replace the computer cover (see "Replacing the Computer Cover" on
page 161), reconnect the computer and devices to electrical outlets, and
then turn them on.
13 Uninstall the driver for the removed card. See the documentation that
came with the card for special instructions.
14 If you removed a sound card:
a
Enter the system setup program (see "System Setup" on page 89),
select
Integrated Audio, and then change the setting to On.
b
Connect external audio devices to the audio connectors on the back
panel of the computer.
15 If you removed a network adapter card:
a
Enter the system setup program (see "System Setup" on page 89),
select
Integrated NIC, and then change the setting to On.
16 Connect the network cable to the network connector on the back panel of
the computer.
Drives
Tower Computer Drives
Possible fully-populated computer configurations:
• Three serial ATA (SATA) or serial-attached SCSI (SAS) hard drives and up
to two optical drives
• Up to two (SAS or SATA) hard drives with up to two optical drives and one
floppy drive or one Media Card Reader