DELL NX046 User Manual
254
Adding and Replacing Parts
17 Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
18 Enter the system setup program (see "System Setup" on page 89) and
select the appropriate
Diskette Drive option.
19 Verify that your computer works correctly by running the Dell Diagnostics.
See "Dell Diagnostics" on page 136 for instructions.
Media Card Reader
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer.
NOTE:
If you are adding a Media Card Reader to your tower computer, see
NOTE:
If you are adding a Media Card Reader to your desktop computer, see
Removing a Media Card Reader (Tower Computer)
1 Follow the procedures in "Before You Begin" on page 151.
2 Remove the computer cover (see "Removing the Computer Cover" on
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the drive panel (see "Removing the Drive Panel" on page 233).
4 Disconnect the interface cable from the back of the Media Card Reader.
5 Disconnect the other end of the interface cable from the system board
4 Disconnect the interface cable from the back of the Media Card Reader.
5 Disconnect the other end of the interface cable from the system board
connector labeled "USB." To locate the system board connector, see