IBM 1483DSV User Manual
3-8
701344-003
Setup Menus, Controls, and Indicators
MUP Overstrikes
With MUP Overstrikes set to Yes, the selected
MUP
symbol overstrikes the displayed
character. With No selected, the displayed character replaces the MUP character. To
change the MUP overstrikes option, highlight MUP Overstrikes and press the Enter
key to toggle between Yes and No (the default).
change the MUP overstrikes option, highlight MUP Overstrikes and press the Enter
key to toggle between Yes and No (the default).
If Mark Unprotected (see Page 3-7) is set to No, your selection for MUP Overstrikes
is ignored.
is ignored.
Row/Column
When Row/Column is turned on, the current row and column position of the cursor is
displayed on the operator status row. The indicated position may not be the actual cursor
position on the display screen. The numbers indicate the location of the cursor in the
actual image that the display station receives from the host system. Highlight Row/
Column and press the Enter key to turn the cursor row/column display On or Off (the
default).
displayed on the operator status row. The indicated position may not be the actual cursor
position on the display screen. The numbers indicate the location of the cursor in the
actual image that the display station receives from the host system. Highlight Row/
Column and press the Enter key to turn the cursor row/column display On or Off (the
default).
Screen Size
To adjust the display screen, highlight Screen Size on the Offline Screen menu and press
Enter to cycle through the four possible screen size settings:
Enter to cycle through the four possible screen size settings:
•
24 X 80 (Mod 2) – default
•
32 X 80 (Mod 3)
•
43 X 80 (Mod 4)
•
27 X 132 (Mod 5)
The screen size displayed is the active screen size.
Partition
The partitioning function supported by the display station is completely a host
controlled function. The display receives partitioning commands from the host when
Partition is enabled on the Offline Screen menu and Native Typewriter is selected on
the Offline Keyboard menu (Figure 3-6 on Page 3-12). To enable the partition function,
highlight Partition and press the Enter key to toggle between On and Off until On is
displayed. The default value is On.
controlled function. The display receives partitioning commands from the host when
Partition is enabled on the Offline Screen menu and Native Typewriter is selected on
the Offline Keyboard menu (Figure 3-6 on Page 3-12). To enable the partition function,
highlight Partition and press the Enter key to toggle between On and Off until On is
displayed. The default value is On.
Reverse Video
The Reverse Video setting enables you to display black characters on a green, amber, or
white screen. To set the Reverse Video option, highlight Reverse Video and press the
Enter key to toggle between On (white characters on a black screen) and Off (black
characters on a white screen). The default setting is On.
white screen. To set the Reverse Video option, highlight Reverse Video and press the
Enter key to toggle between On (white characters on a black screen) and Off (black
characters on a white screen). The default setting is On.
Note:
The Reverse Video feature is supported on 15-inch monochrome monitors only.