IBM 1483DSV User Manual
701344-003
3-13
Setup Menus, Controls, and Indicators
When the display station goes offline, the menu setting for Click Enable is saved. Changes
made to the keyboard click by the controller or by the Alt/F24 toggle key combination
are not saved when the display station goes offline.
made to the keyboard click by the controller or by the Alt/F24 toggle key combination
are not saved when the display station goes offline.
Press the Up or Down Arrow key to highlight Click Enable, then press the Enter key to
toggle between Yes and No (the default). Select Yes to make the keyboard click with
each keystroke or select No to deactivate the keyboard click.
toggle between Yes and No (the default). Select Yes to make the keyboard click with
each keystroke or select No to deactivate the keyboard click.
Click Volume
To adjust the keyboard click volume, highlight Click Volume and press the Enter key to
cycle through the volume choices of Off, 1, 2, 3 (the default), 4, and 5.
cycle through the volume choices of Off, 1, 2, 3 (the default), 4, and 5.
If Click Enable (see Page 3-12) is turned off, setting Click Volume to 1, 2, 3, 4, or 5
does not cause the keyboard to click. If Click Volume is set to Off, an Input Inhibited
condition does not cause the keyboard to click.
does not cause the keyboard to click. If Click Volume is set to Off, an Input Inhibited
condition does not cause the keyboard to click.
Cursor Speed
To change the horizontal cursor speed, highlight Cursor Speed and press the Enter key
to cycle through the choices Slow (the default), Medium, and Fast.
to cycle through the choices Slow (the default), Medium, and Fast.
Repeat Delay
You can change the time interval of starting the continuous display of characters on
autorepeat keys by changing the autorepeat delay speed control. To adjust the speed
delay, highlight Repeat Delay and press the Enter key to cycle through the choices
Short, Medium (the default), and Long.
autorepeat keys by changing the autorepeat delay speed control. To adjust the speed
delay, highlight Repeat Delay and press the Enter key to cycle through the choices
Short, Medium (the default), and Long.
Keyboard Type
Note:
Check with the system operator before changing this value.
The Keyboard Type setting enables you to select a keyboard/display configuration. The
system operator will know in which mode the keyboard should operate. The default
keyboard type, Native Typewriter, is set at the factory before the 1483 is shipped to you.
system operator will know in which mode the keyboard should operate. The default
keyboard type, Native Typewriter, is set at the factory before the 1483 is shipped to you.
The following keyboard types are available:
•
Emulate 88 Key KBD – Enables a 122-key to emulate an IBM 3278 88-key keyboard.
If you intend to use Host Addressable Print, do not select this option. Do not select
this option if you have an 88-key keyboard with a tripad.
If you intend to use Host Addressable Print, do not select this option. Do not select
this option if you have an 88-key keyboard with a tripad.
•
Emulate 88 Key PF-Pad – Enables a 122-key keyboard whose numeric pad has
PF13-24 keys in place of numbers to emulate an IBM 3278 88-key keyboard. If you
intend to use Host Addressable Print, do not select this option.
PF13-24 keys in place of numbers to emulate an IBM 3278 88-key keyboard. If you
intend to use Host Addressable Print, do not select this option.
•
Native Mode - 00
(Native Mode European Typewriter Keyboard)
(Native Mode European Typewriter Keyboard)
•
Native Typewriter
(Native Mode US Typewriter Keyboard)
(Native Mode US Typewriter Keyboard)