IBM 1483DSV User Manual

3-18

701344-003

Setup Menus, Controls, and Indicators

Figure 3-8. Programmable Setup Strings for Prints Screen

Host Addressable Print

The host addressable print feature enables the host to send print requests to the 1483’s
attached printer. LU2 (screen) prints are always formatted by the display according to
the printer menu selections.

To enable or disable host addressable print, highlight Host Addressable Print and press
the Enter key to toggle between Yes (the default) and No. Host addressable print cannot
be enabled if an Emulate 88-key keyboard option is selected on the Offline Keyboard
menu (Figure 3-6 on Page 3-12), or if COAX is selected as the Printer on the Offline
Printer menu.

Controllers that support host addressable print are the MTX/MTC 1174 Network
Controller, Release 7.0 and higher, and the Memorex Telex 1374 Control Unit, Release
6.0 and higher.

Note:

The host addressable print feature supports LU1 SCS commands.

If host addressable print is enabled, the Adjusting Line Feed and Adjusting Form
Feed options are displayed.

Printer Format Control

The printer format control feature enables the user to specify whether the formatting of
LU1 or LU3 will be handled by the display.

Programmable Setup Strings for Prints

1st Position

17th Position

2nd Position

18th Position

3rd Position

19th Position

4th Position

20th Position

5th Position

21st Position

6th Position

22nd Position

7th Position

23rd Position

8th Position

24th Position

9th Position

25th Position

10th Position

26th Position

11th Position

27th Position

12th Position

28th Position

13th Position

29th Position

14th Position

30th Position

15th Position

31st Position

16th Position

32nd Position

Use UP/DOWN Cursor Keys to select position to change
Use LEFT/RIGHT Cursor Keys to alter data at selected position
Use ENTER Key to make changes and return to previous menu
Use RESET Key to return to previous menu
Use CLEAR Key to set all positions to 00