Intel GA-N680SLI-DQ6 User Manual

GA-N680SLI-DQ6 Motherboard

- 42 -

This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.

Enabled

Enable HDD S.M.A.R.T. capability.

Disabled

Disable HDD S.M.A.R.T. capability. (Default value)

Enabled

Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)

Disabled

Disable CPU Hyper Threading.

Enabled

Limit CPUID Maximum value to 3 when use older OS like NT4.

Disabled

Disable CPUID Limit for windows XP. (Default value)

Enabled

Enable No-Execute Memory Protect function. (Default value)

Disabled

Disable No-Execute Memory Protect function.

Enabled

Enable CPU Enhanced Halt (C1E) function. (Default value)

Disabled

Disable CPU Enhanced Halt (C1E) function.

Enabled

Enable CPU Thermal Monitor 2 (TM2) function. (Default value)

Disabled

Disable CPU Thermal Monitor 2 (TM2) function.

Enabled

Enable CPU EIST function. (Default value)

Disabled

Disable CPU EIST function.

Enabled

Enable Virtualization Technology function. (Default value)

Disabled

Disable Virtualization Technology function.

Enabled

Show full screen logo at system startup. (Default value)

Disabled

Disable this function. If you wish to see BIOS POST screen, set this item to
"Disabled".

This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.

PCI

Set Init Display First to PCI VGA card.

PEG

Set Init Display First to PCI Express VGA card (the PCIE_16_1 slot).
(Default value)

PEG(Slot2)

Set Init Display First to PCI Express VGA card (the PCIE_8 slot).

PEG(Slot3)

Set Init Display First to PCI Express VGA card (the PCIE_16_2 slot).

(Note) This item will show up when you install a processor that supports this function.