Apple MD094LL/A User Manual
iMac (27-inch, Mid 2010) Take Apart — Rear Housing
268
2010-09-09
3
Remove foil tape and
gaskets. Examine
plastic tabs under foil
tape. Notice that
some tabs go on the
outside surface and
some on inside
surface of the drive.
gaskets. Examine
plastic tabs under foil
tape. Notice that
some tabs go on the
outside surface and
some on inside
surface of the drive.
4
Remove 4 bezel
screws, 2 on each
side.
screws, 2 on each
side.
5
Remove old bezel
and install new bezel,
taking care that tabs
are properly aligned.
and install new bezel,
taking care that tabs
are properly aligned.
6
Reinstall 4 screws.
7
Apply new foil
tape and 2 gaskets
(included with new
bezel kit) as shown.
tape and 2 gaskets
(included with new
bezel kit) as shown.
8
Once computer is
fully reassembled, test
optical drive (inject,
read, eject) before
returning to customer.
fully reassembled, test
optical drive (inject,
read, eject) before
returning to customer.