Delta Electronics IPM- C Series User Manual

1

Delta Electronics, Inc.

This document guides the user in performing 
electronic measurements on an IPM POL (point 
of load) DC/DC converter using the Delta 
Evaluation Board.

 

 
 

 

The documentation and background information 
listed below is relevant to this evaluation 
procedure: 
 

․

 Applicative date sheets for IPM Series unit 

under evaluation. 

․

 Power Module Evaluation Board Schematic. 

․

 Power Module Evaluation Board Layout. 

 

․ General Test and Safety Procedures. 

 

   
 

 

 
 

 

 

 
The IPM Series, single output,

 

non-isolated 

point of load DC/DC converters, are the latest 
offering from a world leader in power systems 
technology and manufacturing ― Delta 
Electronics, Inc. They operate from a 
3V~5.5V (IPM04C) or an 8V~14V (IPM12C) 
source and provide a programmable output 
voltage of 0.8V to 3.3V(IPM04C) or 0.8V to 
5V(IPM12C). With creative design technology 
and optimization of component placement, 
these converters possess outstanding 
electrical and thermal performance, as well 
as offering extremely high reliability under 
highly stressful operating conditions. All 
models are protected against abnormal 
input/output voltage and current conditions.  
 
This document guides the user through the
evaluation procedure to qualify a POL module.
The data shown in this Evaluation Procedure
is for the SIP and SMT Package Type POL
evaluation board. Please refer to the
appropriate technical data sheet for detailed
performance and technical information for the
specific POL units.