DELL J715N User Manual

19

 

Installation

|

 A small amount of arcing may occur when connecting an EBM to the UPS. This is normal and will not

harm personnel. Insert the EBM cable into the UPS battery connector quickly and firmly.

An optional EBM can be installed with 1000W and 1920/1500W Tower UPS models.

To install the optional EBM:

1

Remove the battery connector cover from the rear panel as shown in Figure 13. Retain the cover
and screws.

 If the UPS is stored or used without an EBM, the battery connector cover must be installed as a safety

precaution.