DELL J730N User Manual
42
|
Operation
Settings
Only available options are displayed.
User settings are not protected by default. You can enable the password through the User Password
setting.
setting.
Table 6. Settings
Description
Available Settings
Default Setting
Change Language
[English] [French] [German] [Spanish] [Japanese]
[Simplified Chinese] [Russian] [Korean]
[Traditional Chinese]
[Simplified Chinese] [Russian] [Korean]
[Traditional Chinese]
English
User Password
[Enabled] [Disabled]
If Enabled, the default password is USER.
NOTE:
If you enter an incorrect password, the
message “Wrong Password” appears. Press any
button to return to the password screen and retry
the password.
button to return to the password screen and retry
the password.
Disabled
Audible Alarms
[Enabled] [Disabled]
NOTE:
If you disable audible alarms, it takes effect
instantly and remains disabled, even after a power
cycle. This differs from the mute feature where the
horn is temporarily silenced on any button press,
but turns on again if a new alarm is triggered.
cycle. This differs from the mute feature where the
horn is temporarily silenced on any button press,
but turns on again if a new alarm is triggered.
Enabled
Set Date and Time
Set Month, Day, Year, Hours, Minutes, and Seconds
Date: mm/dd/yyyy
Time: hh:mm:ss
NOTE:
The date format is dependent on the
language selection.
NOTE:
Time is a 24-hour clock.
01/01/2009
12:00:00
Control Commands from Serial
Port
Port
[Enabled] [Disabled]
If Enabled, control commands are accepted through
the serial port, USB ports, or option card.
the serial port, USB ports, or option card.
If Disabled, configuration and load control
commands are restricted to LCD only.
commands are restricted to LCD only.
Enabled
Output Voltage
[200V] [208V] [220V] [230V] [240V]
[Auto-sensing]
[Auto-sensing]
Auto-sensing
Output Frequency
[50Hz] [60Hz] [Auto-sensing]
Auto-sensing