Tektronix AFG3000 Series User Manual

Operating Basics

AFG3000 Series Quick Start User Manual

Before the password is changed for the first time, the default password is DEFAULT. To change the password, do the 
following steps:

■

Use the front-panel general purpose knob to select a character when you enter a password, and then push the Enter 
Character bezel button. You can also use the front-panel numeric keypad and the Enter button.

1. Select Security Menu from the Utility 

menu.

2. If the Access Protection is set to On, 

turn it off using the Access Protection 
menu. Otherwise, skip to step 3.

3. Select Change Password to display the 

password input page.

4. Enter your current password.

Use the general purpose knob to select 
the characters and push the Enter 
Character bezel button after each 
selection. Then select OK to display the 
New Password input page.

5. Enter a new password. 

As you enter the characters of your new 
password, they are displayed on the 
screen. Check carefully to ensure you 
are entering the desired characters.

6. Select OK to activate the new pass-

word.