3com 3644A User Manual

 

11

it then the output will be changed to OFF status, vice versa.

If you often use a voltage and current as 24V and 2A or 12V and 2.3A and etc, you just need

to set up the data at the first time and then store the data in the power supply. When you need it,

recall it. 3600 series power supply can store up to 10 sets of parameters.

The parameters include 1) Voltage value; 2) Current value; 3) Maximum voltage; 4) Locked/

unlocked keypad; 5) Maximum power ; 6)Baud rate; 7) Communication address.

The store operation always be done after setting up V-set, I-set etc, the operation is as follows:

For example, set up the voltage=15V, current=2A, Maximum output voltage=18V, keypad

locked, Maximum output power=25W, Baud rate=9600, communication address=05, after done

the setup , users can store all the above setup as a set of data, such as the 01 or 02 etc set data.

 Procedure

                The operation Methods                                          LCD display

    Step 1        Press “Store” button                                                               ENTER PASSWORD

    Step 2       Enter the password ( Or jump to step 4 if the keypad            ENTER PASSWORD

                 is unlocked)

    Step 3       Press “Enter” button ( it will return to step 2 if your             ENTER PASSWORD

                 password is wrong for reentering)                                                        1234

    Step 4        Enter the set value for store number(from 1 to 10) by                     SAVE  1

                using the number key or rotate the rotary knob to

                 change the set value number

    Step 5        Press “Store” button to confirm the set value, if the                        SAVE  *

                 number is out of the range from 1 to 10, it will retune to

                 Step 2 for reenter

            It will exit the store operation at any procedure by press ESC button