Sanyo E11A202U User Manual
− 16 −
7. Wiring
CAUTION
！
・
Check that input and output power plugs are firmly seated. Do not exceed the
rated capacity when connecting loads to the output terminals. Check that
rated capacity when connecting loads to the output terminals. Check that
plugs and cards are firmly seated in the external interfaces. Failure to observe
these precautions can result in electric shock, fire, or bodily injury.
・
The input power plug must be grounded. Failure to ground it can result in
electric shock.
electric shock.
7.1 UPS Wiring
①
Check that MAIN MCCB is in the “OFF” position.
②
Connect the INPUT power plug of the UPS to a
utility power outlet.
MODEL
Type of Input pulg
Note
E11A202U001
NEMA TYPE 5-20P
(seen from prong side)
When the AC input power is single-wire
grounded, always connect the ground
phase to the S terminal (phase) side on
the UPS.
E11A202U001J
NEMA TYPE L5-30P
(seen from prong side)
(seen from prong side)
When the AC input power is single-wire
grounded, always connect the ground
phase to the S terminal (phase) side on
phase to the S terminal (phase) side on
the UPS.
①
Switch is “OFF”.
To 3-prong grounded
utility power outlet
Length: a
t least
1.8 m
(a
t least
7.09 inches)
※
This figure shows E11A202U001.
As for E11A202U001J, shape and
the number of receptacles are
different.
E
R
(Or, N)
E
S(W)
(Or, N)