StarTech.com PS2POWER230 Leaflet

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

Manual Revision: 02/03/2012

For the most up-to-date information, please visit: www.startech.com

•  1 x 230 Watt AT Power Supply

•  1 x Instruction Manual

•  1 x Power Cord (NA)

PS2POWER230

*actual product may vary from photos

Note: Check the power supply voltage before installation. It should

be the same as your local power voltage (115V for North America

and 230V for most of the European countries). Change the voltage

setting if necessary.

1.  Disconnect the power cord from your old power supply.

2.  Follow your computer case manual and open the case.

3.  Disconnect all the power connectors from the mother board and

the peripheral devices such as hard drives, floppy disks, etc.

4.  Remove the existing power supply from your computer case and

replace it with the StarTech.com power supply.

5.  Connect the power connectors to your motherboard and

peripheral devices.

6.  Close your computer case.

7.  Connect the power cord to the StarTech.com power supply.

5.9 x 3.35 x 5.87 in. (150 x 85 x 149

mm)

2.82 lbs (1.28 kg)

115/230 V

230W

4 x 4-pin LP4 female, 2 x small internal

power, 2 x LED display power, 1 x PS/2

motherboard adapter