American Dynamics ADMPCPU User Manual

MEGAPOWER CPU 

8200-0421-03, REV. G 

ADMINISTRATOR’S GUIDE 

48 of 82

 

2.  Click the Site Access tab. The selected keyboard 

number appears just below the tab in the 
keyboard field. 

3. Click Add on the right side of the screen. The Add 

Sites dialog box appears. 

 

The Add Sites dialog provides three options. To 
select an option: 

1.  Click the button beside it and complete the 

required information. Options are: 

−  Replace with the following sequence – Enter 

a range of satellite sites; for example: 1-30. 

−  Add a single Site – Click the up or down 

arrows to select a satellite site. 

−  Add a range of Sites – Click the up or down 

arrows on the “from” and “to” fields to select a 
range of satellite sites. 

2. Click OK to save your site choices or Cancel to 

close the dialog box without saving your choices. 

To remove monitor or site access, do the following: 

1.  In the upper screen, click on the keyboard that 

contains the monitor to be deleted. 

2.  In the lower screen, click on the monitor or site 

access to be deleted, and then press Remove on 
the right side of the screen. 

The Definitions – Keyboard/User Priorities screen 
allows the administrator to assign priority access 
levels to individual keyboards. 

Priority levels determine whether the keyboard can 
perform special functions, such as camera lock, 
override, system reset, and others. You create 
priority levels within the Priority Settings tab on the 
Keyboard/Users Priorities screen. 

To define the Keyboard/User Priorities – Keyboards 
configuration, do the following: 

1.  Click on Keyboard/User Priorities link in the 

Explore menu to begin. 

Important: Depending of the setting of the User 
Enable Logon checkbox in the System – Options 
dialog box, one of two screens will appear. 

User Enable Logon checkbox settings: 

−  Unchecked – Figure 103 appears and permits 

assigning of keyboard priorities. 

−  Checked – Figure 104 appears and permits 

assigning of user priorities and passcodes. 

 

2.  In the Keyboards tab, complete the following 

fields: 

−  Keyboard No. – Identifies the keyboard by its 

physical connection to the CPU. 

−  Priority – Identifies the priority level (1-8) 

assigned to the selected keyboard.