Nortel Networks P0607274 0 User Manual
16 Chapter 1 Uninterruptable Power Supply (UPS) Overview
P0607274 02
The UPS device is supported in all markets (110~120V and 220~240V power standards). All
BCMs using version 3.5 software or higher can use the UPS device.
BCMs using version 3.5 software or higher can use the UPS device.
BCM and UPS power and control connections
The UPS device operates in parallel with the BCM 200, 400, and 1000. The BCM obtains power
through the UPS. The UPS obtains power from a conventional AC power source.
through the UPS. The UPS obtains power from a conventional AC power source.
The UPS meets BCM power delivery requirements for 110~120 and 220~240 Volt standards. The
BCM operational power usage range (shown in the following table) is compatible with the UPS
operating range.
BCM operational power usage range (shown in the following table) is compatible with the UPS
operating range.
The serial connection between the BCM and UPS provides power monitoring and control
capability. The UPS service uses standard RS232 serial protocol. Figure 2 shows the physical
BCM connections and OAM topology.
capability. The UPS service uses standard RS232 serial protocol. Figure 2 shows the physical
BCM connections and OAM topology.
Figure 2 UPS/BCM power connections and topology
BCM Input Power Source
110 ~ 120 Volt power standards
220 ~ 240 Volt power standards
Minimum (VAC)
Maximum (VAC)
Minimum (VAC)
Maximum (VAC)
90.0
130.0
220.0
265.0
COM port supports a DB9 serial connection
to a UPS for power monitoring
to a UPS for power monitoring
Unified Manager
Workstation provides UPS
configuration, service
activation and OAM
monitoring applications
Workstation provides UPS
configuration, service
activation and OAM
monitoring applications
Local Area
Network
Network
UPS device
Plug BCM power
cord into UPS
cord into UPS
Plug UPS into AC
power source
power source
CTM 4
1
Aux
2
3
4
DSM 16+
1
2
3
4
1
2
3
4
S tat us
Pow er