Insignia NS-PCW5250 User Manual

Page of 8
1
www.insigniaproducts.com
Introduction
Congratulations on your choice of this Insignia 
NS-PCW4050/NS-PCW4050-C or Insignia 
NS-PCW5250/NS-PCW5250-C power supply. Please 
read this manual carefully and follow the 
instructions before installing the power supply.
This is an advanced power supply with excellent 
acoustic and thermal performance and intelligent 
thermal fan control technology that makes it 
virtually silent. The power supply provides perfect 
protection for your system and comes equipped 
with two +12V rails that can handle a maximum 
load of 18A for additional system reliability.
Safety information
Safety regulations
The power supply meets safety guidelines and 
regulations for UL, cUL, and FCC.
     
Important safety instructions
• Do not place your system near a radiator or other 
heat source.
• Do not place your system close to a source of 
strong magnetic fields.
• Do not place your system in a moist or dusty 
environment, or in an area subject to strong 
vibration.
• Do not place your system in direct sunlight.
• Your computer must operate at a stable AC input 
voltage.
• Your computer should not be situated directly 
next to a heater or another heat source.
• Do not open the cover on the power supply case. 
Dangerous voltages are present inside the cover. 
Your warranty is void if the cover is removed.
• Never operate the device with wet or moist 
hands.
• Never place items in the openings or fan of the 
power supply.
• Make sure that the power cord is plugged into a 
powered electrical outlet.
• Make sure that the power cord is plugged into the 
power supply.
• Make sure that you connect your power supply 
properly. Check your motherboard and graphic 
card manuals for compatibility before connecting 
the power supply to any of your devices.
Caution (for NS-PCW4050/NS-PCW4050-C only): Check the red 
power supply voltage switch setting before installation. The 
setting should be the same as your local power voltage (115 V 
for North America and 230 V for Europe and other countries). 
Change the voltage setting if necessary. Failure to take this 
precaution could result in damage to your equipment and could 
void your warranty.
Note: If the power supply does not work correctly, contact our 
service center immediately at (800) 305-2204.
Power supply components 
and features
Power supply features include:
• The 520 Watt complies with the newest Intel 
standard ATX 12V V2.31 and is downward 
compatible to V2.2 and V2.0. The 400 Watt 
complies with Intel standard ATX 12V V2.2 and is 
downward compatible with V2.0
• Supports Intel and AMD dual-core and multi-core 
processors
• High-performance components designed for 
better reliability
• Dual +12 V outputs for higher power capacity
• One 4+4 pin +12 V CPU connector for high-end 
CPUs
• One 6+2 pin PCI Express connector for high-end 
video cards
• 140 mm low-noise cooling fan
• All DC cables are mesh-sleeved. The length is 
15.75 in. (40 cm)
• High reliability, including built-in protection 
circuit OVP, OLP, SCP, and line input fuse 
protection
Power supply components include:
NS-PCW4050/NS-PCW4050-C power supply
NS-PCW5250/NS-PCW5250-C power supply
AC power 
jack
Cooling fan
Ventilation 
grating
Voltage switch
ON/OFF switch
AC power 
jack
Cooling fan
Ventilation 
grating
NS-PCW4050-NS-PCW5250_14-0324_MAN_V1_ENG.book  Page 1  Tuesday, April 1, 2014  7:30 AM