Pelco c1637m Leaflet

 

Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • 

 

USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150

International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120

 

 

The RK5PWR-300 power supply can be used to replace the failed power supply in 
the RK5000PS-5U. You will know if there is a problem with the power supply 
because the blue Pelco badge on the front panel will turn off. Before replacing the 
power supply, check the fuse. It can be replaced easily with the supplied spare. 
If the fuse is not the problem, follow these steps and refer to Figure 2 to replace 
the power supply.

1. Unplug the AC power cord.

2. Unscrew the two thumbscrews on the front of the chassis that hold the 

power supply.

3. Pull the power supply out of the chassis using the handle.

4. Insert the new power supply.

5. Secure the power supply by tightening the two thumbscrews on the front of 

the chassis.

6. Plug in the AC power cord.

7. Turn on the power switch.

.

 

Internal Power Supply Replacement

Figure 1.  RK5PWR-300 Power Supply

 

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union 
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.