Intel EPS1U User Manual

  

As defined by the IPMI FRU document.  The following record types shall be used on this power supply: 

• 

Power Supply Information (Record Type 0x00) 

• 

DC Output (Record Type 0x01) 

• 

No other record types are required for the power supply. 

MultiRecord information shall be defined as follows: 

Overall Capacity (W) 

350 {Low power versions would be 250 or 125} 

Peak VA 

400 {Low power versions would be 300 or 161} 

Inrush current (A) 

30 

Inrush interval (ms) 

5 

Low end input voltage 
range 1 

90 

High end input voltage 
range 1 

140 

Low end input voltage 
range 2 

180 

High end input voltage 
range 2 

264 

A/C dropout tol. (ms) 

20 

Binary flags 

Set for: Not Hot Swap support, Auto-switch, and PFC 

Peak Wattage 

Set for: 12 s, 400 W {Low power versions would be 300W or 161W} 

Combined wattage  

Set for 5 V & 3.3 V combined wattage of 113 W {Low power versions would be 113W 
or 80} 

Predictive fail tach 
support 

Not supported, 00h value 

Field Name (Output) 

Field Description:  Six outputs are to be defined from #1 to #6, as follows: +3.3 V, +5 
V, +12 V1, +12V2, -12 V, and +5 VSB. 

Output Information 

Set for: Standby on +5 VSB, No Standby on all others. 

All other output fields 

Format per IPMI specification, using parameters in the EPS1U specification.