Telex MS-2002 User Manual

The MS-2002 mounts in a standard 19-inch equipment rack and is 1 RU (Rack Unit) high. When mounting the MS-2002, 
install the supplied black face plates on the appropriate side. The face plates should be mounted with the grooves on the top.

You must  perform the sidetone adjustment (page 10) after all components are connected. With the MS-2002 

being rack mounted, you may not be able to access the sidetone trimmers. In this case, you can position the 
MS-2002 in the rack and make all required connections. Then, adjust the sidetone trimmers before installing and 
tightening all rack mount screws.

Sample connection drawings are shown in figures 3 to 6.

Connection for external program input and PA output are shown in Figure 6 on page 18.

REFERENCE: For more information, see the EMS-4001 User Instruction Manual (P/N 9350-7713-000) which can be 

found at  http://www.telexaudiocom.com/manuals.php.