Minuteman UPS MCP 2000i User Manual
REAR PANEL
The Computer Interface ports are for UPS monitoring and control. There are two female
DB-9’s for interface connection, one for RS-232 communication and one for Dry Contact
interface signals.
The Computer Interface ports are for UPS monitoring and control. There are two female
DB-9’s for interface connection, one for RS-232 communication and one for Dry Contact
interface signals.
The External Battery Connector is for adding more battery capacity to the UPS. Available
on the MCP 2000(i) and MCP 3000(i) only.
on the MCP 2000(i) and MCP 3000(i) only.
The TVSS Slot is for a modular connection used for 10 Base-T network protection and
single or multi-line telephone surge protection (Optional).
single or multi-line telephone surge protection (Optional).
The Input Circuit Breaker will trip in the event the load exceeds the UPS’s power rating.
The Output Circuit Breaker(s) will trip in the event the load exceeds the UPS’s power
rating.
rating.
The Output Receptacles for each model vary and are dependent upon voltage require-
ments for domestic or international applications. See drawings of rear panels for specific
models to determine standard output receptacle configuration. Optional output configura-
tions are available for the MCP 2000(i) and MCP 3000(i) units only. Call Minuteman for details.
ments for domestic or international applications. See drawings of rear panels for specific
models to determine standard output receptacle configuration. Optional output configura-
tions are available for the MCP 2000(i) and MCP 3000(i) units only. Call Minuteman for details.
The Input Power connection varies on all models. For units utilizing IEC input sockets, input
power cords are included. The following cords are standard for input power connections
for the following models: MCP 1000(IEC 320 C-13/5-15P), MCP 1000i(IEC 320 C-13/C-14),
MCP 2000i(IEC 320 C-13/C-14), and MCP 3000i(IEC 320 C-19/pigtail). The MCP 2000 and MCP
3000 utilize a standard 6ft. L6-30P strain relief power cord. Optional input configurations
are available for the MCP 2000(i) and MCP 3000(i) units only. Call Minuteman for details.
power cords are included. The following cords are standard for input power connections
for the following models: MCP 1000(IEC 320 C-13/5-15P), MCP 1000i(IEC 320 C-13/C-14),
MCP 2000i(IEC 320 C-13/C-14), and MCP 3000i(IEC 320 C-19/pigtail). The MCP 2000 and MCP
3000 utilize a standard 6ft. L6-30P strain relief power cord. Optional input configurations
are available for the MCP 2000(i) and MCP 3000(i) units only. Call Minuteman for details.
MCP 1000 Rear Panel
7