Manualsbrain.com
  1. Manuals
  2. Brands
  3. Texas Memory Systems
  4. RamSan- 300
  5. User Manual

Texas Memory Systems RamSan- 300 User Manual

Download
Page of 122
 
 
 
AC Voltage indicator light 
When the power supply is connected to AC power and is operating 
properly, the indicator light attached to each power supply is green.  If the 
green light is not on, either the power supply is disconnected from an AC 
power source or the power supply has failed.  Check the power cable to 
determine if power has been lost to the supply or whether the supply has 
failed.  The front panel display, Text Management Interface, or Web 
interface, may provide additional information regarding the problem. 
 
2.7   Turning on the System 
The RamSan automatically powers on when power is connected to the 
system.  The only time the system does not power on automatically is 
when a user has initiated a manual shutdown or the system has powered 
off due to some failure other than AC power loss.  In the event this 
happens, press the “Power” button, which is the large black button above 
the power supplies.  Please see Section 2.6 Connecting the Power 
2.8   System Initialization 
The front panel display shows the boot process’s current state.  Once the 
power is connected, the system turns on automatically and the front panel 
display begins the power on sequence.  The following happens 
automatically (you can also monitor this boot sequence externally through 
the serial port): 
 
1.  Once AC power is connected, the 
RamSan will power-up with the 
TMS logo.  The front panel 
displays the memory size.   
 
 
Soon after that, you will see 
“Booting…” and then the system 
displays the IP address. 
 
 
TMS |  |  | | | | ||||||()
Texas Memory Systems 
TMS |  |  | | | | ||||||()
Memory Size: 64GB 
Booting ...
IP Address Acquired: 
000.000.000.000 
RamSan-300/320/325 User’s Manual 
 
- 11 -