Powerware 8 - 10 kVA User Manual
UPS 8 – 15 kVA, 230V 50/60 Hz output
User’s Guide
1022403
Revision B1
Revision B1
27
Figure 31.
Identification of the interface port pins.
LanSafe software
The LanSafe software shuts down computers and whole networks in case of an extended power
failure. It provides basic monitoring, data logging, notification and event actions for a single
UPS solution. The software is bundled free of charge in Software Suite CD.
failure. It provides basic monitoring, data logging, notification and event actions for a single
UPS solution. The software is bundled free of charge in Software Suite CD.
The connection procedure for the RS-232 interface port is following:
1. Connect the RS-232 communication cable to the computer.
2. Connect the RS-232 communication cable to the serial interface on the UPS.
3. Run the UPS software installation disk (Software Suite CD) on the computer.
Note!
If communication does not work choose the correct baud rate from the LCD display
Please refer to the optional software manuals for appropriate baud rate settings.
Please refer to the optional software manuals for appropriate baud rate settings.
External control connections
The UPS has an input/output interface for direct communication with your computer system. It
is located behind the front bezel of the UPS unit. The cables connected to these terminals
should be connected to cable clips.
is located behind the front bezel of the UPS unit. The cables connected to these terminals
should be connected to cable clips.
Input and output terminals have a functional isolation from terminal to terminal. They are
connected to the chassis through individual 1 M
connected to the chassis through individual 1 M
Ω resistors.