Powerware 5075 kVA User Manual
48
Powerware BPIII Harsh Environment UPS 50--75 kV Installation and Operation
164291261 Rev. F 111503
Emergency Power Off
An
EMERGENCY POWER OFF pushbutton is provided for situations where you
must immediately remove all power to your critical load. The pushbutton is located
on the Monitor Panel for quick access and is covered with a clear plastic shield to
prevent inadvertent operation. The shield must be raised before pressing the
pushbutton. The
EMERGENCY POWER OFF pushbutton is described in detail in
Chapter 10, “Using the
EMERGENCY POWER OFF Pushbutton.”
Automatic Battery Charge Current Limit
A preset limit restricts battery charging current to protect batteries from damage
due to high current charging. Charging at high currents can overheat and damage
batteries.
Installation Features
Power and control wiring can be routed through the top of the Environmental
cabinet. The cabinet has an
internal wireway.
Options and Accessories
Contact your sales representative for information about any of these available
options:
Remote Monitor Panel
An optional
Remote Monitor Panel (RMP) contains backlit status indicators and a
local horn, allowing you to monitor the operational status and alarm condition of
the UPS from virtually any location within your facility. You can install multiple
RMPs at remote locations to increase your monitoring capabilities. This option is
described further in Chapter 11, “Using Features and Options.”
Relay Interface Module
An optional
Relay Interface Module (RIM) uses relay contact closures to indicate
the operating status and alarm condition of the UPS system. The module uses a
serial interface line and may support up to eight critical loads. This option is
described further in Chapter 11, “Using Features and Options.”
Supervisory Contact Module
An optional Supervisory Contact Module (SCM) establishes an interface between
the UPS manufacturer’s equipment and the customer’s monitor. This interface
allows the customer to monitor operational status of the UPS equipment. This
option is described further in Chapter 11, “Using Features and Options.”
Modem
An optional modem is available for use with the UPS Remote Notification feature
described in Chapter 14, “Optional Remote Notification”. Refer to the manual
supplied with the modem for modem operating instructions.
Customer Convenience Outlet
An uninterruptible 120 VAC, 0.2 amp, fuse-protected convenience outlet is provided
with the optional modem. It is located adjacent to the Communications Panel.