Powerware 9315 UPS User Manual
6−1
EATON Powerware
®
9315 UPS (200–300 kVA) Operation Manual
S 164201036 Rev G www.powerware.com
Chapter 6
Using Features and Options
You can add available options and accessories to enhance the performance of your UPS
system. This chapter provides detailed descriptions of some of the features and options
introduced earlier in this manual.
system. This chapter provides detailed descriptions of some of the features and options
introduced earlier in this manual.
6.1 Building Alarm Monitoring
This standard feature lets you connect the UPS to your building alarms, such as smoke
detectors or overtemperature alarms. The terminals for external connections are located
inside the UPS on the customer interface panel (see Figure 6-1).
detectors or overtemperature alarms. The terminals for external connections are located
inside the UPS on the customer interface panel (see Figure 6-1).
TB1
BLDG ALARM 1
BLDG ALARM 4
BLDG ALARM 5
NOTE:
All building alarm inputs or remote
features require an isolated, normally
open contact or switch (rated at
24 Vdc 20 mA minimum) connected
between the alarm input terminal and
common terminal as shown. All
control wiring, relay, and switch
contacts are customer−provided.
All building alarm inputs or remote
features require an isolated, normally
open contact or switch (rated at
24 Vdc 20 mA minimum) connected
between the alarm input terminal and
common terminal as shown. All
control wiring, relay, and switch
contacts are customer−provided.
1
2
3
4
5
6
3
4
5
6
7
8
8
9
15
10
11
14
13
12
TB2
BLDG ALARM 2
BLDG ALARM 3
BLDG ALARM 6
1
2
3
4
5
6
3
4
5
6
7
8
8
9
15
10
11
14
13
12
ON BYPASS
BATTERY CONTACTOR CLOSED
RELAY 2 NO
ON INV
RELAY 2 NC
RELAY 1 NO
RELAY 1 NC
BLDG ALARM 1 RTN
BLDG ALARM 4 RTN
BLDG ALARM 5 RTN
BLDG ALARM 2 RTN
BLDG ALARM 3 RTN
BLDG ALARM 6 RTN
REMOTE EPO
REMOTE EPO RTN
REMOTE EPO RTN
ON BYPASS RTN
BATTERY CONT RTN
ON INV RTN
ALARM RTN
NOTICE RTN
RS−232
RS−485
Figure 6-1. External Connections for Building Alarm Monitoring
Regardless of how you assign the building alarms, they display as Building Alarm 1, Building
Alarm 2, Building Alarm 3, etc., on the LCD screen of the Monitor Panel. You should use
twisted−pair wires for each alarm input and common.
Alarm 2, Building Alarm 3, etc., on the LCD screen of the Monitor Panel. You should use
twisted−pair wires for each alarm input and common.