Powerware 9390 User Manual

2-1

Powerware

9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C

Chapter 2

UPS Installation Plan and Unpacking

Use the following basic sequence of steps to install the UPS:

1. Create an installation plan for the UPS system (Chapter 2).

2. Prepare your site for the UPS system (Chapter 2).

3. Inspect and unpack the UPS cabinet (Chapter 2).

4. Unload and install the UPS cabinet, and wire the system (Chapter 3).

5. Install features, accessories, or options, as applicable (Chapters 5 and 6).

6. Complete the Installation Checklist (Chapter 3).

7. Have authorized service personnel perform preliminary operational checks and

startup.

NOTE Startup and operational checks must be performed by an authorized Powerware

Customer Service Engineer, or the warranty terms as specified on page W-1 become

void. This service is offered as part of the sales contract for the UPS. Contact service in

advance (usually a two-week notice is required) to reserve a preferred startup date.

2.1 Creating an Installation Plan

Before installing the UPS system, read and understand how this manual applies to the

system being installed. Use the procedures and illustrations in the following chapters to

create a logical plan for installing the system.

2.2 Preparing the Site

For the UPS system to operate at peak efficiency, the installation site should meet the

environmental parameters outlined in this manual. If the UPS is to be operated at an

altitude higher than 1500m (5000 ft), contact your Powerware service representative for

important information about high altitude operation. The operating environment must

meet the weight, clearance, and environmental requirements specified in Drawing

164201535-2 on page A-3 and size requirements specified on Drawing 164201535-9

starting on page A-45.

The UPS cabinets use forced air cooling to regulate internal component temperature. Air

inlets are in the front of the cabinet and outlets are in the top. You must allow clearance in

front of and above each cabinet for proper air circulation.