Toshiba TOSVERT VF-FS1 Series User Manual
E6581373
- 9 -
3. Configurations
3.1. Neuron
ID
L
ON
W
ORKS
device has the individual Neuron ID. The ID is indicated on the option unit as the barcode
(EAN128). Products have 3 sticker labels where the Neuron ID is indicated.
3.2. Service
pin
Service pin function causes the node to propagate the service message over the network so that the
network controller finds the node. There is Service pin as a mechanical switch on the L
network controller finds the node. There is Service pin as a mechanical switch on the L
ON
W
ORKS
option
unit (refer to an attached instruction manual in detail).
3.3. Device interface (XIF) file
Device interface (XIF) files are the files that define the network-visible interface for one or more
L
L
ON
W
ORKS
devices. The device interface is the interface to a device that is exposed over a L
ON
W
ORKS
network. The device interface includes the device’s self-documentation information, the number of
address table entries, the number of message tags, and the number, types, and directions of network
variables.
XIF files are distributed on our web site “www.inverter.co.jp”.
address table entries, the number of message tags, and the number, types, and directions of network
variables.
XIF files are distributed on our web site “www.inverter.co.jp”.
3.4. LNS
Plug-in
LNS Plug-in provides one or more means to monitor or alter configuration properties or network
variables. It may be used for device-specific configuration or monitoring.
The device plug-ins are also distributed on our web site “www.inverter.co.jp”.
variables. It may be used for device-specific configuration or monitoring.
The device plug-ins are also distributed on our web site “www.inverter.co.jp”.
3.5. Inverter
configurations
Set the inverter parameters according to the instruction manual attached with the product.
However, L
However, L
ON
W
ORKS
option unit will edit some of the inverter parameters (fh, ul, ll, acc, dec,
vl
) so that they should not be edited.
Configuration by PC commissioning software (PCM001Z) is also available by using serial
communication option (USB001Z) through RS485 port.
N.B.: Refer to Section 2.3 for RS485 port specification in detail.
communication option (USB001Z) through RS485 port.
N.B.: Refer to Section 2.3 for RS485 port specification in detail.