Black Box LE074AE-R2 User Manual

If problems occur during operation
of your Adapter, one of the messages
below will be displayed. Error
messages can be recognized by the
beep and the word FATAL that
precedes the message. All other
messages on the screen are for
information only. The following is a
list of common communication and
driver error messages:

Check that the adapter is

connected to the SPC or AC power
adapter and that the red LED of the
adapter is on. 

Check that the adapter is properly

plugged into a parallel (printer)
port of the computer. 

Run the SETDIAG diagnostic

program to get more information
about the problem.

The adapter-initialization process

failed. This message is usually
accompanied by another message
that provides more information
about the reasons for the failure.

The adapter failed during memory

test.

Try to load the driver with the

parameter UNIDIR.

Run the SETDIAG diagnostic

program before requesting service.

The adapter failed to read the

EEPROM information correctly.

In most cases, this warning will not

prevent the driver from loading.

Run the SETDIAG diagnostic

program before requesting service.

Additional error messages related

to your network operating system are
described in the appropriate NOS
manuals.

6. Error Messages