Black Box LE074AE-R2 User Manual
6
MODULAR PARALLEL ADAPTERS AND MODULAR MEDIA UNITS
3. Installation
IMPORTANT!
Make sure the computer is
turned off while performing
the install procedure.
turned off while performing
the install procedure.
3.1 Attach the Media Unit
To attach the Media Unit to the
Adapter, hold the Adapter with the
logo facing up, press the top and
bottom of the unit together, and
insert it until it snaps into the
Adapter (see Fig. 3-1).
Adapter, hold the Adapter with the
logo facing up, press the top and
bottom of the unit together, and
insert it until it snaps into the
Adapter (see Fig. 3-1).
Follow these steps to install your
Adapter. Detailed instructions
appear in Sections 3.1 through 3.4.
Adapter. Detailed instructions
appear in Sections 3.1 through 3.4.
1. Attach the media unit.
2. Connect the network cable.
3. Plug the Ethernet adapter into
the computer.
4. Install the Self-Powering Cable
or an AC power adapter.
Fig. 3-1. Attaching a Media Unit to the Adapter.
NOTE
If you have purchased a media unit additional to that supplied with the
Adapter, remove the supplied unit by pressing the top and bottom
together and pulling it out of the Adapter. Then, insert the new media unit
as described above.
Adapter, remove the supplied unit by pressing the top and bottom
together and pulling it out of the Adapter. Then, insert the new media unit
as described above.