Powerware Model V-2000B User Manual
Embedded Audio = 49
Configuration
From the GUI window, click on Configure > Channel 1… . The Channel Configuration
window will appear. Use this window to configure Embedded Audio.
Figure 12: Channel Configuration Window
Input Source
Three buttons select the input source for video and audio. These are:
•
CVBS/Discrete Audio (composite video with AES/EBU or analog audio inputs)
•
SDI/Discrete Audio (serial digital video with AES/EBU or analog audio inputs)
•
SDI/Embedded Audio (serial digital video with embedded audio)
The discrete audio inputs can be either: two stereo pairs (4 channels) of AES/EBU digital
audio, or one stereo pair of +4dBu analog inputs, as determined by jumpers on the audio card.
Regardless of the input selected, audio will always appear in the SDI output stream as
embedded audio, and at the discrete outputs as either AES/EBU (digital) or as +4 dBu balanced
analog audio. The Image Server supports Group 1 embedded audio, which includes audio
channels 1-4, 20-bit, 48 kHz, synchronous audio, as per SMPTE 272A.
channels 1-4, 20-bit, 48 kHz, synchronous audio, as per SMPTE 272A.