Powerware Model V-2000B User Manual

Advanced Playlisting = 67 

Displays the Mark Out point time code.  When no Mark Out point has been set manually, 

this displays the default EOM time code (00:00:00:00). 
The values in this display window may be set by three methods: 

•

 

Trim Mark Out point from the keyboard:  Use the mouse or keyboard arrows to move 

between fields.  When a field is highlighted, enter a numeric value from the keyboard. 

•

 

Trim Mark Out point with up/down arrows:  Use the mouse or keyboard arrows to move 
between fields. When a field is highlighted, increment the up/down arrows (spinwheels) 

to change a numeric value. 

•

 

Whether or not a clip is still or playing, press Mark Out to capture a time code value 

from the clip. 

Displays the total running time (TRT) of the current clip.  For example, if the first frame of the 

clip is 00:00:00:00 and last frame displayed at the end is 00:00:01:15, the reported duration 

will be 00:00:01:16.  The difference between the time code of the last frame and duration is 

accounted for because this calculation is zero-based, and both the first and last frames play, 

so both are counted when calculating duration. 
With NTSC drop-frame time code, the displayed duration may not be the exact numerical 

value of ((Trim Out – Trim In) + 1) due to the discontinuities in the drop-frame time line. 

The Review Clip button ( |<–>| ) cues the clip to the Mark In point (or SOM, if no Mark In 

point exists) and begins playback.  Review Clip will stop at the Mark Out point.  The Mark 

Out point will be displayed in Still mode. 
The Review Clip button may be used to check the Mark In point without playing all the way 
through the clip.  After Review Clip is pressed and play begins, all of the standard transport 

buttons are available for use. 

The Review Out button ( –>| ) may be used to audition the Mark Out point without playing 
all the way through the clip.  It will cue the clip to three seconds before the Mark Out point 

(or EOM, if no Mark Out Point exists) and then begin playback.  Review Out will stop at the 

Mark Out Point. 
After Review Out commences, all of the standard transport buttons are available for use. 

The On-Screen interface displays absolute time when in edit mode, and elapsed time, 

relative to the head point, once the edit has been saved.