Allied Telesis AT-PWR3202 Leaflet

*613-000397 Rev B*

PN 613-000397 Rev. B

1

2

3

AT-PWR3202 Power Supply is designed to be installed in an AT-RPS3204 
Redundant Power Supply (RPS). The RPS can supply power to Allied Telesis 
switches if the switch’s main power supply fails

.

Verify that the correct components are included in your package:
•

AT-PWR3202 Power Supply

•

One 21-pin D-combo connector cable

•

This installation guide

If any item is missing or damaged, contact your Allied Telesis sales 
representative for assistance.

The AT-PWR3202 Power Supply has a Lifetime Year Warranty (Five Years 
Power Supply and Fan). For detailed warranty information, see the 
www.alliedtelesis.com website.

To install an AT-PWR3202 Power Supply, perform the following procedure:
1. Remove the AT-PWR3202 unit from its shipping package and store the 

package in a safe place. You must use the original package if you need to 
return the power supply to Allied Telesis.

2. On the back of the AT-RPS3204 unit, locate the power switch that 

corresponds to the slot where you are going to install the power supply and 
verify that the On/Off button is in the Off (out) position. From left to right on 
the back, the power supplies are identified as B2, B1, A2, A1. (An AT-
RPS3204 is shipped with one AT-PWR3202 in the slot marked A1.)

3. Using a Phillips head screwdriver, remove the cover from the slot in the front 

of the AT-RPS3204 unit where you want to install the power supply.

As an example, the following steps show an AT-PWR3202 unit installed in 
slot A2 of the AT-RPS3204 Redundant Power Supply.

Keep the slot cover in a safe area in case you remove a power supply. The 
slot cover helps maintain proper air flow through the RPS.

4. Slide the AT-PWR3202 Power Supply into the slot

5. Use a Phillips head screwdriver to tighten the captive screws.

6. On the back of the AT-RPS3204 unit, plug one end of the 21-pin D-combo 

connector cable into the connector that corresponds to the slot in which you 
installed the AT-RPS3202 Power Supply.

7.

Tighten the captive screws.

892

893

894

895

198

199