Avaya 106760804 User Manual
Chapter 13
13-10
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ipx gns-response-delay
Command Mode
Interface Configuration.
Description
Sets the delay time (milliseconds) when responding to IPX GNS requests.
The no form of this command restores the default. The default is zero,
which indicates no delay.
The no form of this command restores the default. The default is zero,
which indicates no delay.
Syntax
Sample Output
The following example sets the delay time for an interface labeled “boston”
to respond to IPX GNS requests to 200 milliseconds.
to respond to IPX GNS requests to 200 milliseconds.
(config-if:boston)#
ipx gns-response-delay 200
Systems
P550R, P580, P880, and P882.
To Configure:
ipx gns-response-delay <milliseconds>
To Restore Default:
[no] ipx gns-response-delay
Table 13-4. Parameters, Keywords, Arguments
Name
Definition
<milliseconds>
The time, in milliseconds, that the switch waits after
receiving a GNS request from an IPX client before
responding with a server name to that client. The range is 0
to 5000 milliseconds.
receiving a GNS request from an IPX client before
responding with a server name to that client. The range is 0
to 5000 milliseconds.