Avaya 106760804 User Manual
Document No. 10-300090, Issue 1
21-33
Port
set port point-to-point admin status
Command Mode
Global Configuration.
Description
Specifies whether a port is connected to a shared LAN segment or a point-
to-point LAN segment. A point-to-point LAN segment is connected to
exactly one other bridge (normally with a direct cable between them). Only
point-to-point links and edge ports can rapidly transition to forwarding
state.
to-point LAN segment. A point-to-point LAN segment is connected to
exactly one other bridge (normally with a direct cable between them). Only
point-to-point links and edge ports can rapidly transition to forwarding
state.
If you set this field to Auto, the switch automatically detects whether the
port is connected to a shared link or a point-to-point link. Ports operating in
half duplex are set to non-point-to-point, and ports operating in full duplex
are set to point-to-point. You can, however, manually set the type of link.
port is connected to a shared link or a point-to-point link. Ports operating in
half duplex are set to non-point-to-point, and ports operating in full duplex
are set to point-to-point. You can, however, manually set the type of link.
Syntax
set port point-to-point admin status {<mod-num> | <mod-swport-range>}
[...,{<mod-num> | <mod-swport-range>}] {force-true | force-false | auto}
[...,{<mod-num> | <mod-swport-range>}] {force-true | force-false | auto}
Systems
P580 and P882.
Table 21-28. Parameters, Keywords, Arguments
Name
Definition
<mod-swport-
range>
range>
The module and port or port range.
force-true
Defines the port as connected to a point-to-point link.
force-false
Defines the port as connected to a shared LAN segment.
auto
Automatically detects whether the port is connected to a
shared link or a point-to-point link. Ports operating in half
duplex are set to non-point-to-point, and ports operating
in full duplex are set to point-to-point
shared link or a point-to-point link. Ports operating in half
duplex are set to non-point-to-point, and ports operating
in full duplex are set to point-to-point
If you select this setting, the OperPointToPoint field of
the show port command displays the link type that is
detected.
the show port command displays the link type that is
detected.