Manualsbrain.com
  1. Manuals
  2. Brands
  3. Avaya
  4. 106760804
  5. User Manual

Avaya 106760804 User Manual

Download
Page of 764
Chapter 23
23-2
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
access-list
Command Mode
Global Configuration.
Description
Creates a rule in an access control list (ACL). The rule that you set is 
applied on all of the ports on the switch.
* Note:
You must enable the ACL on which you want to set a rule. Only 
one ACL can be enabled at a time. 
The no command deletes an ACL rule or ACL.
Syntax
To Create a 
Standard 
ACL Rule:
access-list <access-list-name> <access-list-index> 
{permit [{use-priority <priority> | use-diffserv [mask] | 
remark-diffserv <dscp> [mask] | use-l2}] | deny | fwd1 | 
fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8} {<source-
ip-addr> <source-wildcard> | any | host <source-ip-
addr>}
To Create an 
Extended 
ACL Rule:
access-list <access-list-name> <access-list-index> 
{permit [{use-priority <priority> | use-diffserv [mask] | 
remark-diffserv <dscp> [mask] | use-l2}] | deny | fwd1 | 
fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8} 
<protocol-id> {<source-ip-addr> <source-wildcard> | 
any | host <source-ip-addr>} [{lt <port> | eq <port> | gt 
<port> | range <port> <port>}] {<dest-ip-addr> <dest-
wildcard> | any | host <dest-ip-addr>} [{lt <port> | eq 
<port> | gt <port> | range <port> <port>}] [established]
To Remove 
an ACL Rule 
or ACL: 
no access-list <access-list-name> [<access-list-index>]
Table 23-1.  Parameters, Keywords, Arguments
Name
Definition
<access-list-name>
A unique name that identifies the access control 
list.
<access-list-index>
The unique rule number within the access list.
1 of 4