Avaya 106760804 User Manual
Document No. 10-300090, Issue 1
23-5
80-Series QoS
Sample Output:
Standard ACL
Rules
Standard ACL
Rules
The following table provides examples of standard ACL rules.
[{lt <port> | eq <port> | gt
<port> | range <port>
<port>}]
<port> | range <port>
<port>}]
A destination port or range of destination ports
that pass data between two hosts or switches
using the Transmission Control Protocol (TCP)
or the User Datagram Protocol (UDP).
that pass data between two hosts or switches
using the Transmission Control Protocol (TCP)
or the User Datagram Protocol (UDP).
Enter a number between 0 and 65,535.
For a complete list of well-known port numbers,
see the following URL:
see the following URL:
[established]
Permits TCP connections to be established that
match the rule.
match the rule.
Table 23-1. Parameters, Keywords, Arguments
Name
Definition
4 of 4
Table 23-2. Examples: Standard ACL Rules
To. . .
Enter. . .
• Use the DSCP in the packet to
classify all traffic that has a source
IP address in the 10.10.60 subnet.
IP address in the 10.10.60 subnet.
• Mask the three least significant bits
of the DSCP.
(configure)#
access-list
MyAccessList1 4 permit use-
diffserv mask 10.10.60.0 0.0.0.255
diffserv mask 10.10.60.0 0.0.0.255
Assign a priority of 7 to all traffic that
has a source IP address in the 10.10.70
subnet.
has a source IP address in the 10.10.70
subnet.
(configure)#
access-list
MyAccessList1 5 permit use-
priority 7 10.10.70.0 0.0.0.255
priority 7 10.10.70.0 0.0.0.255
• Replace the existing DSCP with a
DSCP of 5 for all traffic that has a
source IP address in the 10.10.80
subnet.
source IP address in the 10.10.80
subnet.
• Mask the three least significant bits
of the DSCP
(configure)#
access-list
MyAccessList1 6 permit remark-
diffserv 5 mask 10.10.80.0 0.0.0.255
diffserv 5 mask 10.10.80.0 0.0.0.255
Use the layer 2 priority of the packet
to classify all traffic that has a source
address in the 11.11.11 subnet
to classify all traffic that has a source
address in the 11.11.11 subnet
(configure)#
access-list
MyAccessList1 7 permit use-l2
11.11.11.0 0.0.0.255
11.11.11.0 0.0.0.255
Use the DSCP in the packet to classify
all traffic that has a source IP address
of 199.93.239.168
all traffic that has a source IP address
of 199.93.239.168
(configure)#
access-list
MyAccessList1 8 permit use-
diffserv host 199.93.239.168
diffserv host 199.93.239.168
1 of 2