Allied Telesis AT-PWR1200 User Manual
AT-RPS3000 Redundant Power Supply Installation Guide
17
Power Supply
Slots
The slots on the back panel of the chassis are for two power supply
modules. The slots are labeled A and B.
modules. The slots are labeled A and B.
Figure 2. Slots A and B for the Power Supply Modules
Note
The chassis is shipped from the factory with a blank panel over the
power supply slots.
power supply slots.
RPS Connectors
The four RPS connectors, which connect the chassis to up to four x610
Series switches, are paired with the power supply slots. RPS 1 and 2 ports
receive power from the power supply module in slot A.
Series switches, are paired with the power supply slots. RPS 1 and 2 ports
receive power from the power supply module in slot A.
Figure 3. Slot A and RPS 1 and 2 Ports
Slot A
Slot B
2166
B
B
1
2
3
4
SYSTEM
PoE+ / SYSTEM
PoE+ / SYSTEM
SYSTEM
MODULE B
MODULE A
A
A
Slot A
RPS 1 and 2 ports
2166
B
B
1
2
3
4
SYSTEM
PoE+ / SYSTEM
PoE+ / SYSTEM
SYSTEM
MODULE B
MODULE A
A
A