Allied Telesis AT-PWR250 User Manual
Chapter 1: Overview
16
Features
The AT-RPS3000 Chassis is a modular power supply system for the x610
Series of Layer 3 Gigabit Ethernet switches. It protects the switches from
power supply failures and provides additional PoE+ power.
Series of Layer 3 Gigabit Ethernet switches. It protects the switches from
power supply failures and provides additional PoE+ power.
The chassis can support two or four x610 Series switches, depending on
the switch model. It has two slots for power supply modules, an LED panel
for viewing the status of the power modules, and four RPS connectors.
the switch model. It has two slots for power supply modules, an LED panel
for viewing the status of the power modules, and four RPS connectors.
As explained in this overview, the power supply modules in the chassis
function in either a redundant or an active state, depending on the switch
model. For non-PoE+ x610 Series switches, the chassis acts as the active
power source for the switches, whose own internal, non-removable power
supplies function as backup modules. For PoE+ switches, the chassis acts
as a redundant power supply for system power and in a load-sharing
mode for PoE+ power.
function in either a redundant or an active state, depending on the switch
model. For non-PoE+ x610 Series switches, the chassis acts as the active
power source for the switches, whose own internal, non-removable power
supplies function as backup modules. For PoE+ switches, the chassis acts
as a redundant power supply for system power and in a load-sharing
mode for PoE+ power.
Warning
The AT-RPS3000 Chassis is designed specifically for the x610
Series of Layer 3 Gigabit Ethernet switches and should not be used
with any other product.
Series of Layer 3 Gigabit Ethernet switches and should not be used
with any other product.
Note
The AT-RPS3000 Chassis is not a battery backup unit. The power
supply modules in the chassis have to be connected to active power
sources to deliver power to the switches.
supply modules in the chassis have to be connected to active power
sources to deliver power to the switches.
LED Panel
The front panel of the AT-RPS3000 Chassis has an LED panel that
displays status information about the power supply modules and RPS
ports. The LEDs are described in “LEDs” on page 42.
displays status information about the power supply modules and RPS
ports. The LEDs are described in “LEDs” on page 42.
Figure 1. LED Panel
2148
LED Panel