APC AP89XX User Manual

Administrator only

View and manually configure these network settings for the Rack PDU: 

To view the network settings of the Rack PDU, type 

tcpip

 and press 

E

NTER

. 

To manually configure an IP address of 

150.250.6.10

 for the Rack PDU, type:

tcpip -i 150.250.6.10

Administrator only

Enable IPv6 and view and manually configure these network settings for the Rack PDU: 

To view the network settings of the Rack PDU, type 

tcpip6

 and press 

E

NTER

. 

To manually configure an IPv6 address of 

2001:0:0:0:0:FFD3:0:57ab for the 

Rack PDU, type:

tcpip6 -i 2001:0:0:0:0:FFD3:0:57ab

-i

<IP address>

Type the IP address of the Rack PDU, using the format xxx.xxx.xxx.xxx

-s

<subnet mask>

Type the subnet mask for the Rack PDU.

-g

<gateway>

Type the IP address of the default gateway. 

 use the loopback 

address (127.0.0.1) as the default gateway.

-d

<domain name>

Type the DNS name configured by the DNS server. 

-h

<host name>

Type the host name that the Rack PDU will use.

-S

enable | disable

Enable or disable IPv6.

-man

enable | disable

Enable manual addressing for the IPv6 address of the Rack PDU.

-auto

enable | disable

Enable the Rack PDU to automatically configure the IPv6 address.

-i

<IPv6 address>

Set the IPv6 address of the Rack PDU.

-g

<IPv6 gateway>

Set the IPv6 address of the default gateway.

-d6

router | statefull | 
statelss | never

Set the DHCPv6 mode, with parameters of router controlled, statefull (for 
address and other information, they maintain their status), stateless (for 
information other than address, the status is not maintained), never.