APC BE600N-BR User Manual
1
User Guide - Back-UPS
®
BE600N-BR
Connect the Battery
The Back-UPS is shipped with one battery cable disconnected. Remove the “Stop! Connect the Battery” label that covers the terminals. Prior to connecting any
equipment to the unit, connect the battery cable to the unused battery terminal. Small sparks may occur when the battery cable is connected to the battery terminal.
equipment to the unit, connect the battery cable to the unused battery terminal. Small sparks may occur when the battery cable is connected to the battery terminal.
Connect Equipment
Battery Back-up + Surge Protection outlets
Outlets provide protection to connected equipment when the Back-UPS is turned ON and
connected to utility power.
connected to utility power.
Outlets receive power from the Back-UPS for a limited period of time when a power outage,
or brownout condition occurs.
or brownout condition occurs.
Outlets provide protection from power surges or spikes.
Connect a computer, monitor and other peripheral devices to the outlets.
Connect a Computer
If utilizing PowerChute software, connect the supplied data cable to the data port on the rear side of the Back-UPS and to the USB port on the
computer.
computer.
PowerChute software provides automatic file saving and shutdown of a connected computer during a sustained power outage.
PowerChute software is an option that can be purchased along with a data cable through the APC Web site, www.apc.com.
Connect a Modem/Phone/FAX
1. Use a standard telephone cable to connect the Back-UPS Wall Outlet port to a telephone wall jack.
2. Use a standard telephone cable to connect the Back-UPS Modem/Phone/FAX port to a modem or FAX machine.
This unit is intended for indoor use only.
Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
Connect the Back-UPS power cord directly to a wall outlet. Do not use a surge protector or an extension cord.
Press the battery compartment cover
release tab located on the rear side of the unit.
Slide the battery cover off.
Slide the battery cover off.
Connect the battery cable securely to the battery
terminal.
Reinstall the battery compartment cover. Be sure that
the release tab locks into place.
b
u06
4b
bu1
1
4
a
bu
0
6
6
b
Back-UPS
bu
12
7a
Battery Back-up + Surge Protection
AVR
Overload
Check Battery
b
u
12
8a
Modem/Phone/
FAX
FAX
Wall Outlet
Data Port
8 A
5 A