APC 120 V User Manual

1

S

ETUP

 

button - Push to scroll through the Setup menu screens. Press and hold for three seconds to save the current 

screen as the default screen.

2

S

TATUS

 button - Push to scroll through the menu screens. Press and hold for 10 seconds to view the Diagnostic 

menu screens.

3 LCD Display 
4

O

N

/O

FF

 

button - Push this button to apply power to the outlets. The unit will continue to provide surge protection 

when the unit is turned on or off.

5

U

P

/D

OWN

 buttons - Use the up and down buttons to scroll through options on the menu screens.

6 Removable front bezel - The front bezel can be removed to connect the battery, or to replace the battery.

1 Coaxial surge protected, input and output connectors
2 Battery Backup

 

outlets with noise filtering; voltage regulation is available on the J35B model

3 Surge Protection outlets with noise filtering
4 Circuit breaker reset button
5 120 Vac input outlet, use with the supplied input power cord
6

Building wiring fault LED See “Troubleshooting” on page 9.

7 TVSS ground screw. Use a wire to connect any ungrounded component to this screw. Connecting to the TVSS screw 

will prevent sound or video interference from ungrounded equipment.

8 Telephone line surge protection, input and output connectors
9 USB port for use with optional PowerChute

®

 Personal Edition software, available as a free download at 

www.apc.com. In the event of a power outage, this software will save files and gracefully shut down the computer. 
Use the supplied USB cable to connect the UPS to the home computer. 

: Surge Protection, Controlled by Master outlet, J35B models only.
; Controlled by Master outlets with Battery Backup, J35B models only.
< Master outlet, J35B models only.

av

02

2a

Circuit Breaker

Push to Reset

Tel/DVR/SAT/DSL

USB

Cable
 In

Cable
Out

Data Port

 In

 To
Equipment

Input 120 V-

TVSS
GND

Building

Wiring Fault

Battery Backup

Surge Only