Premier Mounts CPD10WALLARM User Manual

           CPD10WALLARM

Page 8                               

Visit Premier Mounts website at http://www.mounts.com

 Installation 

Instructions





Slide the extension arm into the open end of the CPD10WALLARM (the front of the mount).





Adjust length so that the center of the adjustable mounting bracket matches the throw distance calibration.





Line up the mounting holes on the extension arm with the mounting slots on the CPD10WALLARM.





Using a screwdriver, insert and fi nger-tighten two (2) M6 x 12mm security head screws and

 

M6 fl at washers 

through  the external slide plate.





Attach the projector.

Proceed to the "Adjustable Mounting Bracket Installation" section.

M6 x 12mm Security Screw

            Security Wrench

           M6 Flat Washers

CPD10WALLARM

 Please see the Operator’s Manual to determine the correct throw distance (the distance from the projector to the 

screen). The throw distance must be determined prior to mounting the projector.

       External Slide Plate

Extension Arm 

External 
Slide Plate





Raise the adjustable mounting bracket into 

position.





Align the mounting holes of the upper mounting 

plate with the mounting holes on the projector 

arm.

  Four (4 - two per screw) 

¼

˝ nylon washers must 

be placed between the adjustable mounting 

bracket and the projector arm (see illustration to 

the right).

CPD10WALLARM

Adjustable 

Mounting 

Bracket

M6 x 25mm 

Security Screw

¼˝ Nylon 

Washer 

Upper Mounting 

Plate