Cannon 3035 User Manual

Communication Environment Setup

Settings Common 

to t

h

e Netw

or

k 

Protocols

IMPORTANT

 

•

If you want to use a Canon printer driver or utility, press [On] for both <Use SNMP 
v. 1> and [Enable Dedicated Port].

•

You can restrict the IP addresses of computers on which items can be set or 
browsed. If you restrict the IP addresses, it is not possible to set or browse detailed 
information concerning the machine on computers other than those whose IP 
addresses are allowed, even if <Use SNMP v. 1>, <Use SNMP v. 3>, and [Enable 
Dedicated Port] are 'On'. For details, see "TCP/IP Settings," on p. 3-3.

➞ 

[On]: You can spool print jobs transmitted to this machine on the machine's hard 
disk. Set the spooler if you are using the optional UFR II/PCL Printer Kit, the 
optional PS Printer Kit, the optional Super G3 FAX Board, or the optional Super 
G3 Multi-Line FAX Board.

IMPORTANT

 

If the optional PS Printer Kit is activated, take note of the following:

- If the print job is sent from a Macintosh computer to a PS printer, you cannot 

specify whether to spool under this option. Spooling is determined by the name of 
the printer selected in the Macintosh screen. For more information, see "Setting 
Up a Computer for Printing," on p. 6-4.

- If you print a file in PDF or PS format by specifying its URL on the Remote UI, the 

print job will always be spooled, regardless of the settings made under this option.

NOTE

 

When you spool a print job on the machine's hard disk, the time required to release 
a computer outputting a print job is shortened.