Marantz VP-11S1 User Manual

You can connect this projector to HD-Video /PC using RGB IN port, or DVD Plyer /Satellite /Cable Tuner
/PC using HDMI IN port.

Connect one end of the RGB cable to the RGB IN port, or one end of the HDMI cable to the HDMI IN
port on the projector.

Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal
computer.

If using DVI-A or DVI-D output, use respectively a DVI-A-RGB or DVI-D-HDMI conversion cable.

When projecting a video image from a device connected to the HDMI terminal, follow the
procedure below.

1. Turn on power of this unit. (

☞

P.16)

2. Set the input video source to HDMI input. (

☞

P.16)

3. Turn on power of the device connected to the HDMI terminal of the unit (i.e. DVD player).

If the procedure above is not followed, projected image may corrupt.
For the details of the HDMI terminal on the device connected with the unit, see the instruction
manual of the device.

RGB OUT

or

DVI-D out

RGB OUT

or

DVI-D out

RGB (D-Sub monitor) cable

(commercially available)

Monitor output

RGB OUT

or 

DVI-A OUT

DVI-D OUT 

or 

HDMI OUT

HDMI-HDMI cable or HDMI-DVD-D cable

(commercially available)

RGB out

or

DVI-D out

You can control total home theater system using PC or Marantz receiver equipment.
For installing below system, consult with Marantz authorized dealer.

REMOTE CONTROL IN

REMOTE CONTROL OUT

RS-232C cable 
(female-female, straight type,
commercially available)

3.5mm Mini Plug (Mono)

(commercially available)

Control Adapter cable 

(commercially available)

Control Adapter cable

(supplied)

VP11S1U_01_ENG  06.4.6  1:09 PM  ページ10