Planar PD7170 User Manual

PREL

IMINA

RY

Memory: Select Memory from the Main menu, then press ENTER to recall image 

quality settings previously saved, or to save changed settings in any of four 

memory locations.
• Recall Memory: Select Recall Memory from the Memory menu to recall 

saved image quality settings.  Unless you select Default (see below), this 

control affects all sources, not just the active source.
• User Memory 1 and User Memory 2 contain the factory default settings 

when the projector is initially turned on.

• When you recall the ISF Day or ISF Night memory settings, all settings 

associated with these stored values are grayed out. This prevents 

unintended adjustments from being made.  To remove this restriction, 

choose User Memory 1 or User Memory 2. 

 

ISF Day and ISF Night are grayed out unless these custom settings have 

already been saved.

• Choose Default to restore the factory-default settings for the active source 

only. The other sources are unaffected.

• Save Settings: Select Save Settings from the Memory menu to save any 

image-related settings you have changed to User Memory 1 or User 

Memory 2. 

The following items are saved (for all sources, not just the active source):
• Brightness / Contrast
• Color Saturation / Color Tint
• Sharpness (all settings in sub-menu)
• Noise Reduction (all settings in sub-menu)
• Color Space
• Video Standard
• Gamma
• Color Temperature
• DLP Frame Rate
• Color Gamut
• DynamicBlack
• Adaptive Contrast
• RGB Adjust (all settings in sub-menu)
• Lamp Power

• Save ISF: Select Save ISF from the Memory menu to save any image-related 

settings you have changed to the ISF Day or ISF Night memory location.  

The settings that are saved are the same as those saved with the Save 

Settings command (see above).