Planar PD7170 User Manual

IMINA

RY

Source Select: To select a video source, press   or   to highlight Source Select, 

then press ENTER. This displays the Source Select sub-menu, shown in Figure 4-7. 

The default source selection is HDMI 1. All sources that are not available per the 

source enable function (refer to Source Enable on page 56) are grayed out.

Figure 4-7. Source Select Sub-Menu

PIP Select: To select a PIP (secondary) video source, press   or   to highlight 

PIP Select, then press ENTER. The default PIP selection is Off.

All sources that are not available per the source enable function (refer to 

All sources that cannot be used for PIP due to a shared electronic path with the 

Active source are grayed out. The PIP source is a saved setting for each source, 

like brightness and contrast.

If for some reason the current PIP source becomes invalid (by disabling it in the 

source enable menu, for instance), PIP Select automatically resets to Off.

Resync: If the projected image becomes unstable or degraded, press   or   

to highlight Resync, then press ENTER. This causes a re-acquisition of the active 

source and the PIP source, if present. It also changes any Fine Sync settings 

(described on page 53) for this timing to the default setting.